A variety of user created mappings for Automap control of plug-in instruments and FX:
All functions assigned momentary action buttons.
loopmash performance mapping for zero sl mk2
This has both coarse (on a fader) and fine (on an encoder) control of depth.
1 zipped file for Twisted Tools - Vortex - Reaktor ensemble. This 7-pages Automap was created with Remote Zero SL and works only in VST mode / not as standalone in Reaktor. Have fun with it! Greetz
The four Dimension Pro Elements are mapped to pages 1-4 roughly in the order they appear in the plug-in. Most knobs and buttons are mapped plus course and fine tune. However, the zones and modulators are not mapped.
The mixer mappings are on page 5 encoders = fx sends,
pots = pan and volume and
faders = the elements fx input and wet/dry mix.
Page 6 is mapped to the mod fx and reverb.
If there is any zipper noise from the encoders, eg. cut off in an Element , try increasing the Max: from 256. This reduces the step size but increases the amount of encoder turning.
Page1 - Basics
Page2 - Filter LFO1
Page3 - LFO2 Env´s
Page4 - TripleVCO
Page5 - DualVCO
Page6 - DCO
Page7 - DualVCO Eco
Page8-11 - FX
enjoy this incredible instrument and support UHE...!!!
JBM 61H is a plugin that aims to mimic the way PC speakers sounded and was programmed in games to produce all sorts of cold hard noises.
This automap is constructed so that each parameter is mapped twice on both the left and the right knob groups. The slider is mapped to one parameter on the previous page. The left knob group tweaks the parameters with a fast approach, the right side is used for fine adjustments of the parameters.
This is just a simple mapping for 2 decks in Torq 2.0 unfortunately Torq doesn't support led feedback but the mapping is simple to remember once you have used it 2 times. It also allows you to trigger the 4 effects in each deck and the kill switches on the mixer for hi med lo. Enjoy it and once I have figgered out a better update I will let all of you know.
LA2A, 1176LN, Space Echo, Plate 140, EMT 250, Helios 69 and many more!
Guru 1.6 Remote Zero SL.Hope u like it))
Redline Equalizer Automap made with Cubase and a Novation SL MKI.
72 Ch. mixermap for Cubase or Nuendo.
All 72 ch. have separete potis for vol, pan and send. All 72 ch. have separete button for solo, mute and record.
Hope your work will be faster...
greetz Jay Hyme
just 3 pages for basic controls:
1 - easy morph, Arp, FX on/off
2+3 - FX
This is a straight forward Nocturn map for the Bass Station plugin, assigning most parameters from left to right as you see the plugin. Pay attention to the buttons as well, some are redundant, but might work better than knobs in certain situations. It is divided into 5 pages, with the last being the setup page, in case you want to tweak expressive control from your keyboard controller.
Complete mapping of the LennarDigital Sylenth1 synthesizer. Including the effects section and arpeggiator. Made for the ReMOTE ZeRO SL MK1.
this is a selfmade mapping that suits my needs when dj´ing with traktor SCRATCH pro (not traktor pro).
hope it works for u.
I mapped the most important parameters of this synth across various pages.
Automap for FabFilter Pro-Q VST/RTAS plug-in.
All documented cc parameters of the monster mapped in a logical order from OSC to LFO to Filter, Envelopes to the Mixer. You can easy navigate through the pages, they're all named and you now always where you are. have fun
Ratshack Reverb 2
iPhone Cubase Short cuts
An in depth sound design based template for Linplugs Alpha 3
This is my setup for controlling Stylus RMX from a Zero SL MkII.
The setup is created using enable host automation, and uses all 256 available host learns in Stylus RMX. It would be possible to create a more extensive setup using MIDI, but that would mean having MIDI routed to Stylus all the time, which is a pain in logic (unless you get down and dirty with the Environment). So this is an attempt to provide the best controls in a logical manner for everyday and performance use.
There are two files; a ctl_rmx file, which is a template you can load into Stylus (MIDI Learn > Load Template), and the other is the automap file. Make sure that 'MIDI Learn > Ignore Assignments When Loading Multi' is ticked, so that when you load a multi it doesn't clear the template. (For some reason when you load a template into Stylus it appears to clear all the sounds, but a reload of the multi and everything is fine'
Page 1 - Mix control: Level, Pan, Aux1, Mute, Solo and Play for each part
Pages 2-9 - Part Controls - each page contains:
For a single part:
Depth and Rate for Amp, Filter and Pan LFOs
Attack, Release and Depth for Amp and Filter Envs
Cutoff, Resonance, Width, Gain, Filter Type and 24dB
Pitch, Emph, Tone, Sample Start, Reverse
Half and Double controls from Time
Momentary Play, Unmute and Solo buttons
Tone control also from Crossfade slider and Exp. Pedal
For all 8 parts:
Mute, Solo, Play Buttons
Aux1 Reverb Controls:
Room Size, Time, Density, Low Tone, High Tone, Freeze
For all 8 parts:
Level, Aux1 send, Momentary Mute, Momentary Solo, Momentary Play
All play footswitch, global level
If you want to use this as a starting point for your own setup, you can use 'Unlearn Control' in Stylus RMX, followed by 'Enable host automation' to reassign the slot. You can view the full Control Assignments by clicking View > Controls (top left). Then Save your modified template.
I hope someone finds this useful :)
Basic Logic Channel Strip EQ mapping. Uses the two faders to control the frequencies/gain of each node, and buttons to switch each node in/out.
The first page gives control over the Hi and Lo cuts. Subsequent pages give access to the other nodes in turn i.e. Low Shelf, the four middle eq bands and finally the Hi Shelf.
Common performance variables mapped to knobs. More static variables to pots.
We Came To Kill - Studio layout by Dusty of WCTK.
Top Knobs - Generator editing & Subtractive Synthesis
Bottom Knobs - Sound Modulation Control
First 4 Faders - Amp ADSR
Second 4 Faders - Filter ADSR
X/Y Pad - Cutoff & Mix
The Bass Station gets much more interesting when you ignore the presets and really tweak it.
Made for Nocturn users.
Page 1 - EQ Gain and Frequencies Low to Hi, Left to Right
Page 2 - Lo/Hi Pass Filters(2x) and Mid Band Qs
Page 3 - Dynamics
All Pages - Fader controls gain
I used the vst version wrapped as audio unit with vstau.
Just a simple 1 page mapping. Nitro main edit parameters matched to Nocturn layout, mix control on X fader
ZeRO MkII MAP FOR MASSIVE
Page 1: Main Parameter (Makro/Filter)
Page 2: Effects and OSC
Page 3: Modulators 5-8
Page 4-7: Envelopes
Page 8: OSC
This is a mapping for Omnisphere I have created.
It has 2 files inside.
1. Omnisphere.automap, and
1. Load the Omnisphere.automap through automap and then select it to be the default control map for the client (you can do that through the file menu).
2. Copy the Omnisphere.midiLrn file to either :
HD/Library/Application Support/Spectrasonics/STEAM/Omnisphere/Settings Library/Presets/MIDI Learn/
User/Library/Application Support/Spectrasonics/STEAM/Omnisphere/Settings Library/Presets/MIDI Learn/
(This depends on wherever you installed your Omnisphere library).
Now the most important part (also the most irritating) is to load Omnisphere.midiLrn file in every instance of omnisphere in every project that you might work on.
There are five pages of mappings. I've tried to divide the sections to diff pages:
1st is for the Multi page in omni.
2nd for Filter
3rd for Oscillator
4th for LFOs (only first 4)
5th for Envelopes
There are a few random mappings:
like Arp On/Off is on page 3 and Layer A and B levels are on page 2.
So do check it out fully to know of other random maps.
Ive only added mappings of Aux 1 for each of the 8 multis. Would request you to add the rest yourself.
Its very easy.
First select the crosshair at the bottom of the omni (next to the Red A) so that it becomes red and you are in Automate Once mode on the automap window.
Next right-click on the knob or slider on omnisphere that u want to map and select 'Enable Host Automation'.
Next move the knob or slider on omni.
finally move the knob or slider on the SL that u want to map it to.
Now u have to move the knob or slider on SL fully in both directions till you see the corresponding knob or slider move in omni.
That should do it.
Mail me if you're finding this too confusing and ill try and help you out.
my email is firstname.lastname@example.org
Have fun with this kick ass plugin and your novation.
Made with Novation SL MK I / Cubase 5 / VST3 demo version
Its a great Eq and its fun to get some analogue feel back with the novation controllers :)
Use Nocturn to control mixer, devices, scenes, clips, master, tempo, etc. It includes python scripts that communicate with Live 8. You don't need to map manually any parameter. Under GPL license. Revision 1 that fix a bug with banks of less of 8 parameters. See also: https://forum.ableton.com/viewtopic.php?f=1&t=122831
The simplest on-board delay.